3rd Hand Support System

You looking to find the "3rd Hand Support System" Good news! You can purchase 3rd Hand Support System with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $39.99    

Product Feature

• 60in. long
• Working range of 5 ft - 12 ft.
• Textured rubber pads with articulating heads for gripping most surfaces
• Ball-detent locks on main pole, secondary pole interface
• Custom clip for holding plastic sheeting for dust barrier

Product Description

Need an extra hand Versatile tool provides support, bracing and clamping assistance for cabinet installation, window coverings, crown moldings, countertop backsplashes and plastic dust barriers. 3rd Hand is also helpful for installing drywall, ceiling paneling and light fixtures. Supports up to 70 lbs.

3rd Hand Support System Review

I HAD A WATER PIPE BREAK THAT RUINED MY ENTIRE CEILING IN OUR LIVING ROOM. AFTER GETTING OUTRAGEOUS BIDS TO REPAIR THE CEILING I DECIDED TO PURCHASE FOUR THIRD HANDS AND DID THE ENTIRE CEILING MYSELF. WHAT I SAVED BY DOING IT MYSELF I COULD HAVE BOUGHT A FOREST OF THIRD HANDS. AMAZONS PRICE COULD NOT BE BEAT ESPECIALLY WITH THE FREE SHIPPING AT THE TIME I BOUGHT THEM. I HAVE USED THEM SEVERAL TIMES SINCE MY CIELING PROJECT AND AGAIN THEY MORE THAN PAYED FOR THEMSELVES.

Most of the consumer Reviews tell that the "3rd Hand Support System" are high quality item. You can read each testimony from consumers to find out cons and pros from 3rd Hand Support System ...

R&M Hoists RBC Beam Clamp, 1 ton Capacity, 3"- 9" Width

You looking to find the "R&M Hoists RBC Beam Clamp, 1 ton Capacity, 3"- 9" Width" Good news! You can purchase R&M Hoists RBC Beam Clamp, 1 ton Capacity, 3"- 9" Width with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $78.15    

Product Feature

• Jaws designed to mount on tapered or flat beams
• Designed for Industrial Use
• Individually serialized with Load Test Certificate
• Built-in suspension bar
• Easily installed and adjusted by hand

Product Description

This R&M Hoists beam clamp RBC1000 1 ton capacity fits beam flange range between 3"-9". It provides temporary or permanent mounting point for hook mounted hoists or lever pullers. Versatile jaws designed to mount on a wide range of tapered or flat beams. Built-in suspension bar allows for low headroom. Easily installed and adjusted by hand. Designed to minimize stress applied to beam. Designed for industrial use; read the installation, operation and maintenance manual for safe operation. One year warranty - details @ http://wwwrmhoistcom/downloads/StandardWarranty.pdf. Assembled and tested in Springfield Ohio. Each unit is individually serialized and is provided with a load test certificate; all R&M manual chain hoists and lever hoists are statically and dynamically tested with a minimum of 125% rated load prior to shipping.

R&M Hoists RBC Beam Clamp, 1 ton Capacity, 3"- 9" Width Review

It came quick, packaged well, and new in the box. Works great, holds up great, and works well for what we use it for. It's a nice lil piece of equipment.

Most of the consumer Reviews tell that the "R&M Hoists RBC Beam Clamp, 1 ton Capacity, 3"- 9" Width" are high quality item. You can read each testimony from consumers to find out cons and pros from R&M Hoists RBC Beam Clamp, 1 ton Capacity, 3"- 9" Width ...

1-1/4 SWIVEL PULLEY SGL WHEEL

You looking to find the "1-1/4 SWIVEL PULLEY SGL WHEEL" Good news! You can purchase 1-1/4 SWIVEL PULLEY SGL WHEEL with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $1.83    

Product Feature

• 841520304 SGL SWVL PULLEY1-1/4
• 1-1/4 SWIVEL PULLEY SGL WHEEL

1-1/4 SWIVEL PULLEY SGL WHEEL Review

- Good price
- Shipped fast
- Single shaft pulley
- Thin material so I worry about overall strength
- No greasing so it made some horrid metal on metal noises
- Used some WD40 and it helped

Overall, it's... ok.

Most of the consumer Reviews tell that the "1-1/4 SWIVEL PULLEY SGL WHEEL" are high quality item. You can read each testimony from consumers to find out cons and pros from 1-1/4 SWIVEL PULLEY SGL WHEEL ...

Rugged Ridge 11540.15 Mounting Spacer Plate for Warn Power Plant Winch

You looking to find the "Rugged Ridge 11540.15 Mounting Spacer Plate for Warn Power Plant Winch" Good news! You can purchase Rugged Ridge 11540.15 Mounting Spacer Plate for Warn Power Plant Winch with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $21.41 $16.75   

Product Feature

• Sold as a pair
• Made of durable steel
• No-drill bolt on application
• Durable black finish
• For XHD winch bumper base for JK

Product Description

These spacers are required when mounting a WARN Power Plant Winch on the XHD Bumper System.

Rugged Ridge 11540.15 Mounting Spacer Plate for Warn Power Plant Winch Review

I bought these spacers to use with my XJ's OR-Fab winch bumper so I could mount a Warn XD9000. The XD9000 is larger than the "average" winch and the end was banging into the angled outer lip of my bumper mounting plate area, preventing it from sitting flush with the plate. These spacers provided exactly the right amount of room for the end to clear the plate lip. They are way more robust than an equivalently thick stack of fender washers, and will do a much better job of withstanding winching forces. The package comes with the longer bolts necessary to properly secure the winch, too, so no worries there. The hole spacing is a standard size (or at least standard to Warn, I'm betting it's an industry standard too), which means there are probably many more uses for these, too, besides just the PP winch on one specific bumper. Bravo!

Most of the consumer Reviews tell that the "Rugged Ridge 11540.15 Mounting Spacer Plate for Warn Power Plant Winch" are high quality item. You can read each testimony from consumers to find out cons and pros from Rugged Ridge 11540.15 Mounting Spacer Plate for Warn Power Plant Winch ...

Jaguar Plastics High Density Clear Flat-Bottom Trash Bags, 30 Gallon, 10 Micron, 20 Rolls of 25 (JAGRH303710) Category: Commercial Can Liners

You looking to find the "Jaguar Plastics High Density Clear Flat-Bottom Trash Bags, 30 Gallon, 10 Micron, 20 Rolls of 25 (JAGRH303710) Category: Commercial Can Liners" Good news! You can purchase Jaguar Plastics High Density Clear Flat-Bottom Trash Bags, 30 Gallon, 10 Micron, 20 Rolls of 25 (JAGRH303710) Category: Commercial Can Liners with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $36.03    

Product Feature

• Application - Can Liner
• Capacity_Range_Volume_Min - 20 gal
• Capacity_Range_Volume_Max - 30 gal
• Thickness - 0.39 mil
• Grade - Medium-Duty

Product Description

Star seal bottom helps prevent leakage. High-density polyethylene offers superior film strength. Interleaved coreless rolls dispense easily. Application: Can Liner; Capacity Range (Volume) [Min]: 20 gal; Capacity Range (Volume) [Max]: 30 gal; Thickness: 0.39 mil. ~ Includes 500 can liners per case.

Jaguar Plastics High Density Clear Flat-Bottom Trash Bags, 30 Gallon, 10 Micron, 20 Rolls of 25 (JAGRH303710) Category: Commercial Can Liners Review

These bags work okay. They are smaller than I thought, but fits my trash just fine. No sure if I will be reordering.

Most of the consumer Reviews tell that the "Jaguar Plastics High Density Clear Flat-Bottom Trash Bags, 30 Gallon, 10 Micron, 20 Rolls of 25 (JAGRH303710) Category: Commercial Can Liners" are high quality item. You can read each testimony from consumers to find out cons and pros from Jaguar Plastics High Density Clear Flat-Bottom Trash Bags, 30 Gallon, 10 Micron, 20 Rolls of 25 (JAGRH303710) Category: Commercial Can Liners ...

JDM Cl7 Honda Accord Euro R Front & Rear Emblem Combo

You looking to find the "JDM Cl7 Honda Accord Euro R Front & Rear Emblem Combo" Good news! You can purchase JDM Cl7 Honda Accord Euro R Front & Rear Emblem Combo with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $95.00    

Product Feature

• JDM
• Honda
• Accord
• Euro R
• Emblem

Product Description

"GENUINE JDM EURO R Front & REAR EMBLEM Combo for Accord Euro-R 2 door 4 doorAdds a nice touch to your USDM Accord TSX. In Japan, the newest Honda Accord has the same body style as the U.S. Acura TSX.The Euro-R trunk emblem from the Japanese Accord is the perfect dress up for your TSX.As you should know the Accord ""Euro-R"" is as awe-inspiring as the ""Type-R"" of the Civic or Integra in Japan. Except the Euro-R is a special designation for European market. This classy emblem has the subtle smoked chrome finish.Just peel the self adhesive backing and stick on the back of your ACCORD trunk.2- piece Euro R combo for your legendary Honda AccordJust clip on the front grill and it gives you that JDM bad ass look, You may want to use the proper screw (not included) to tighten it.Genuine import from Honda Japan. Designed for :All CL7, and the US model of Acura TSXFront Emblem Dimension is about 4.5 inches by 0.84 inchesRear Emblem Dimension is about 5.7 inches x 0.9 inchGenuine import from Honda Japan"

JDM Cl7 Honda Accord Euro R Front & Rear Emblem Combo Review

So I got the emblems and i was very impressed. Good size and just like picture. Can not wait to install. Also fast shipping.

Most of the consumer Reviews tell that the "JDM Cl7 Honda Accord Euro R Front & Rear Emblem Combo" are high quality item. You can read each testimony from consumers to find out cons and pros from JDM Cl7 Honda Accord Euro R Front & Rear Emblem Combo ...

Buyers 2in. x 6in. Rope Ring Tie-Down Strap - For E-track, 2000-lb. Capacity, Model# 01080

You looking to find the "Buyers 2in. x 6in. Rope Ring Tie-Down Strap - For E-track, 2000-lb. Capacity, Model# 01080" Good news! You can purchase Buyers 2in. x 6in. Rope Ring Tie-Down Strap - For E-track, 2000-lb. Capacity, Model# 01080 with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $4.99    

Product Feature

• 2in. x 6in. rope ring tie down strap
• Attaches to Item# 450786 E-track strip
• 2000-lb. rated capacity
• Universal fitting

Product Description

This Buyers 2in. x 6in. rope ring tie down strap attaches to Item# 450786 E-track strip. Capacity (lbs.): 2,000, Dimensions: L (ft.) x W (in.): 6 in. x 2in.

Buyers 2in. x 6in. Rope Ring Tie-Down Strap - For E-track, 2000-lb. Capacity, Model# 01080 Review

Not a bad product, works as designed, I haven't had any problems to date. Seems to fit the track well and hold securely.

Most of the consumer Reviews tell that the "Buyers 2in. x 6in. Rope Ring Tie-Down Strap - For E-track, 2000-lb. Capacity, Model# 01080" are high quality item. You can read each testimony from consumers to find out cons and pros from Buyers 2in. x 6in. Rope Ring Tie-Down Strap - For E-track, 2000-lb. Capacity, Model# 01080 ...

Neodymium Magnets N42 1" x 1/8" x 1/8" NdFeB Rare Earth Magnets 10-Count

You looking to find the "Neodymium Magnets N42 1" x 1/8" x 1/8" NdFeB Rare Earth Magnets 10-Count" Good news! You can purchase Neodymium Magnets N42 1" x 1/8" x 1/8" NdFeB Rare Earth Magnets 10-Count with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $5.40    

Product Feature

• Neodymium Iron Boron (NdFeB) Rare Earth Magnets
• Package of 10 Magnets
• Grade - N42
• 4.44 lbs Holding Power
• 1'' length x 1/8" width x 1/8" height

Product Description

This magnet is made of NdFeB magnets, also known as rare earth magnets or super powerful magnets Gauss Ratings: 13,200 Gauss

Holding Power: 4.44 lbs

Magnetized Direction: Poles are on the 1"X1/8" surfaces.

Coating: Nickel-Copper-Nickel triple-layer, the best available

About Neodymium Magnets:

Neodymium magnets are one of rare earth permanent magnets. Neodymium magnets are also known as NdFeB magnets, or neo rare earth magnets. Since it's very strong, people also simply call it super strong magnets or super powerful magnets. The major elements of this magnet include neodymium (Nd), iron (Fe) and boron (B), or NdFeB. About magnet4sale.com: magnet4sale.com is the online store of the CMS Magnetics Inc., which has been supplying permanent magnets to North American industries since 1999. CMS Magnetics carries all types and sizes of permanent magnets, including: neodymium magnets, ceramic magnets, SmCo magnets, AlniCo magnets, and flexible magnets. CMS also carries magnetic assemblies and tools like: magnetic cup holders, industrial magnetic lifters, magnetic sweepers, magnetic brooms, magnetic hooks, fuel magnets, water magnets, badge magnets, etc.

Neodymium Magnets N42 1" x 1/8" x 1/8" NdFeB Rare Earth Magnets 10-Count Review

They're neodymium magnets, so they stick to each other and to ferrous metals with an enormous amount of force. Be careful when you use them. Because they're long and thin they'll shatter more easily than the rounder ones. Because these have their long faces magnetized, they have other applications than similar ones that have the ends magnetized.

Most of the consumer Reviews tell that the "Neodymium Magnets N42 1" x 1/8" x 1/8" NdFeB Rare Earth Magnets 10-Count" are high quality item. You can read each testimony from consumers to find out cons and pros from Neodymium Magnets N42 1" x 1/8" x 1/8" NdFeB Rare Earth Magnets 10-Count ...

Magliner 116-UA-1060 Aluminum Handtruck with Dual Handles

You looking to find the "Magliner 116-UA-1060 Aluminum Handtruck with Dual Handles" Good news! You can purchase Magliner 116-UA-1060 Aluminum Handtruck with Dual Handles with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $149.95    

Product Feature

• Straight back frame
• Flared double pistol grip handle
• 18 x 7 ½ inch die cast aluminum nose plate
• 10 inch pneumatic wheels

Magliner 116-UA-1060 Aluminum Handtruck with Dual Handles Review

I was concerned it wouldn't be high enough but it is. It is very easy to use and makes my life a whole lot easier by allowing me to move heavy garden bins that are difficult for me to handle without it.

Most of the consumer Reviews tell that the "Magliner 116-UA-1060 Aluminum Handtruck with Dual Handles" are high quality item. You can read each testimony from consumers to find out cons and pros from Magliner 116-UA-1060 Aluminum Handtruck with Dual Handles ...

Sava CBL-880 Delrin Pulley Wheel For cable size to 3/16, Bore (A)=.258 Diameter

You looking to find the "Sava CBL-880 Delrin Pulley Wheel For cable size to 3/16, Bore (A)=.258 Diameter" Good news! You can purchase Sava CBL-880 Delrin Pulley Wheel For cable size to 3/16, Bore (A)=.258 Diameter with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $1.89    

Product Description

Provides high strength and rigidity as well as excellent resistance to moisture, gasoline, sunlight, solvents, etc.

Sava CBL-880 Delrin Pulley Wheel For cable size to 3/16, Bore (A)=.258 Diameter Review

Great for my project.For small rope hoist in my basement.Fast shipping and well packed.
material is strong plastic,not sensitive for dry-wet conditions.THX

Most of the consumer Reviews tell that the "Sava CBL-880 Delrin Pulley Wheel For cable size to 3/16, Bore (A)=.258 Diameter" are high quality item. You can read each testimony from consumers to find out cons and pros from Sava CBL-880 Delrin Pulley Wheel For cable size to 3/16, Bore (A)=.258 Diameter ...